$78
AXIS P1365 Mk II Network Camera
AxisNetwork Camera- Light sensitive with Light finder Technology
- Flexible CS-mount lens alternatives
- Saving costs with Axis Zip stream
- Up to 50/60 fps in HDTV 1080p
- WDR – Forensic Capture
Description
| Image sensor | 1/2.8” progressive scan RGB CMOS |
| Lens | IR corrected, CS-mount lens, P-Iris
Varifocal 2.8–8 mm, F1.3 Horizontal field of view: 112°–39° Vertical field of view: 58°–21° |
| Day and night | Automatically removable infrared-cut filter |
| Minimum illumination | Color: 0.11 lux
B/W: 0.01 lux, at 50 IRE F1.3 HDTV 1080p 50/60 fps: Color 0.22 lux B/W: 0.02 lux, at 50 IRE F1.3 |
| Shutter speed | 1/66500 s to 2 s |
| Video compression | H.264 (MPEG-4 Part 10/AVC) Baseline, Main and High Profiles
Motion JPEG |
| Resolution | HDTV 1080p 25/30 fps (WDR): 1920×1080 to 160×90
HDTV 1080p 50/60 fps (no WDR): 1920×1080 to 160×90 |
| Frame rate | Up to 50/60 fps (50/60 Hz) |
| Video streaming | Multiple, individually configurable streams in H.264 and Motion
JPEG Axis Zipstream technology in H.264 Controllable frame rate and bandwidth VBR/ABR/MBR H.264 |
| Image settings | Compression, color, brightness, sharpness, contrast, local
contrast, white balance, exposure control, exposure zones, Forensic WDR: Up to 120 dB depending on scene, fine tuning of behavior at low light, rotation: 0°, 90°, 180°, 270° including Corridor Format, dynamic text and image overlay, privacy masks, mirroring of images |
| Pan/Tilt/Zoom | Digital PTZ
Uploadable PTZ driver (Pelco D pre-installed) |
| Audio streaming | Two-way, full duplex |
| Security | Password protection, IP address filtering, HTTPSa encryption,
IEEE 802.1X (EAP-TLS)a network access control, Digest authentication, user access log, signed firmware Brute force delay protection |
| Supported protocols | IPv4, IPv6 USGv6, HTTP, HTTPSa, HTTP/2, SSL/TLSa, QoS
Layer 3 DiffServ, FTP, CIFS/SMB, SMTP, Bonjour, UPnP™, SNMP v1/v2c/v3 (MIB-II), DNS, DynDNS, NTP, RTSP, RTP, SRTP, SFTP, TCP, UDP, IGMP, RTCP, ICMP, DHCPv4/v6, ARP, SOCKS, SSH, LLDP, MQTT v3.1.1, Syslog |
| Casing | Metal (zinc)
Color: White NCS S 1002-B |
| Memory | 512 MB RAM, 256 MB Flash |
| Power | 8–28 V DC, max 7.3 W, typical 4.2 W
Power over Ethernet (PoE) IEEE 802.3af/802.3at Type 1 Class 3, max 6.8 W, typical 3.6 W |
| Connectors | RJ45 10BASE-T/100BASE-TX PoE
I/O: 4-pin 2.5 mm terminal block for two configurable inputs/outputs RS485/RS422, 2 pcs, 2 pos, full duplex, terminal block DC input, terminal block, 3.5 mm mic/line in, 3.5 mm line out P-Iris connector (compatible with DC-iris) |
| IR illumination | Power-efficient, long-life 850 nm IR LEDs. Range of reach up to
15 m (50 ft) depending on scene |
| Storage | Support for microSD/microSDHC/microSDXC card
Support for SD card encryption (AES-XTS-Plain64 256bit) Support for recording to network-attached storage (NAS) For SD card and NAS recommendations see axis.com |
| Operating conditions | 0 °C to 55 °C (32 °F to 131 °F)
Humidity 10-85% RH (non-condensing) |
| Storage conditions | -40 °C to 65 °C (-40 °F to 149 °F)
Humidity 5-95% RH (non-condensing) |
| Dimensions | 205 x 78 x 46 mm (8.1 x 3.1 x 1.8 in) |
| Weight | 630 g (1.4 lb) |
There are no reviews yet.